How to remove VID drive in DL360 Gen10

[PeteM2]

Hello all,

Seeing some strange LUNs on my 360G10 within the HVT and wondering if anyone knew how to eliminate them.  They are presenting as ILO LUN 00 - 02 all Media 0.

I see this was addressed several years ago but I am not able to get those solutions to work as the VID disablement option seems to have vanished. 

The system is complete reset with no OS installed.

There are no SD or USB drives inserted either.

Thanks in advance!

[Suman_1978]

Hi,

Starting from Gen9 or Gen10, the support for Virtual Install Disk is removed.
In your case, have you tried updating the iLO firmware?

Thank You!
I work with HPE but opinions expressed here are mine.

[PeteM2]

Hello Suman,

Thank you for the reply!

Yes, I have updated ILO to 3.03 and the System ROM to U32 v3.00. 

Updated IP from 3.88.6 to 3.89.

Still showing the removable drive with ILO luns. Not sure where to go from here.  I cannot see these anywhere else outside of the HVT.

[Cali · Accepted solution]

Most Time Reset RBSU solve it:

Restoring default manufacturing settings (hpe.com)

DL380 Gen 10 VID drive - Hewlett Packard Enterprise Community (hpe.com)

Solved: How to remove VID drive in DL560 Gen10 - Hewlett Packard Enterprise Community (hpe.com)

Cali