HPE Community
HPE ProLiant
HPE ProLiant
Have questions about ProLiant servers installation, usage, maintenance, and upgrades? Find answers and share knowledge in this HPE community forum.
1755184 Members
4807 Online
108830 Solutions
New Discussion

Join the conversation with experts and colleagues

Register with HPE Community
HTTPS access in UPS
Jis__Thomas
yesterday
Posted to:
Servers - General
Original author:
Jis__Thomas
How to enable HTTPS access in HPE UPS Model: HPE R5000 3U L630 High Voltage NA/JP UPS
Microserver Gen 10 plus System test error
Hermann77
yesterday
Posted to:
ProLiant Servers (ML,DL,SL)
Original author:
Hermann77
Hi everyone, I tried to do a hardware test with Intelligent provisioning tool but I found the error shown in the image below: The installed firmware in my Microserver Gen 10+ I think I need to update the Intel (R) I350 Gigabit Network Connection firm...
Gen11 Service Pack for ProLiant Version 2024.04.00.00
MikeJKuhn
yesterday
Posted to:
ProLiant Servers (ML,DL,SL)
Original author:
MikeJKuhn
Anyone know why the current SPP: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/#/index.aspx?version=gen11.2024.04.00.00 Does not run on ProLiant Microserver Gen10 Plus v2 and ProLiant ML350 Gen 11? I get a root prompt...
DL380Gen11 EDSFF
Gromz
a week ago
Posted to:
ProLiant Servers (ML,DL,SL)
Original author:
Gromz
Question about DL380Gen11 12EDSFF chassis and EDSSF NVMe drives. There is 12 slots, which controller are the drives connected to? QuickSpec state that DL380 Gen11 12EDSFF NC CTO P52536-B21 have Embedded SW RAID with 14 SATA ports (12-ports accessible...
What is the EOSL End of Service Life for FFU Med 64GB DL380 Gen10 KPDL380- V5-8C?
DonCrabtree
Monday
Posted to:
ProLiant Servers (ML,DL,SL)
Original author:
DonCrabtree
What is the End of Service Life for a DL380 Gen10 purchased in 2018?
ML110 G7 POST ERROR: 0053
RJC123
3 weeks ago
Posted to:
ProLiant Servers (ML,DL,SL)
Original author:
RJC123
I have an HP ML110 G7 which I normally keep powered down. Just recently I powered it back on and does not go into POST. ILO3 console shows POST ERROR: 0053. No video is shown on connected video device. I cannot find this code anywhere in any HP docum...
Re: Query: Firmware update – User token USB key required?
ljkhlkbljhvgkhg
01-10-2023
Posted to:
ProLiant Servers (ML,DL,SL)
Original author:
rznr
OH MY GOD, what is this stupid piece of *****!? Can't we just update firmware without being tortured with useless stuff like that? Now the deployment of a server gets delayed because I have to wait for someone to connect the stupid USB stick to the s...
Re: HP Proliant DL380e G8 with P420 - drive Degraded (Not authenticated) after replacement
SydUmar_1
03-21-2024
Posted to:
ProLiant Servers (ML,DL,SL)
Original author:
Shalak
Hello Shalak, This is working as per design. Whenever a non-HPE drive is being used it would flag that as Not authenticated. Unfortunately, there's no way to bypass this. It may have not flagged previously (Older Non-HPE drives) maybe due to differen...
Re: G10 SPP 2021.04.0 create on usb key utility 3.0 can't boot
FezUSA
04-28-2021
Posted to:
ProLiant Servers (ML,DL,SL)
Original author:
xiaoV
I finally figured this out definitively for my environment! Using a 32GB flash drive, I "mount" the downloaded ISO file (latest SPP > 2021040) and navigate to the USB > USBKey folder and launch USBkey.exe When the utility opens, point...
  • Legend
  • New MessagesNew Messages
  • No New Messages No New Messages
  • Hot TopicHot Topic
  • Replied-to Thread Replied-to Topic
  • Read Only ThreadRead-Only Topic
Top Kudoed Authors Last 30 Days
Author
Kudos
Suman_1978 Avatar
Suman_1978
10
shuff Avatar
shuff
7
Sunitha_Mod Avatar
Sunitha_Mod
4
View all
Top Solution Authors Last 30 Days
View All
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.