Hi We have a DL380 G10 with a HPE SN1100Q 16Gb Dual Port Fibre Channel, also we have a MSA 2060. MSA directly connected to server by FC to SN1100Q. ESXi 6.7 Installed on server and a veeam backup installed as a VM, also we have other VMs on server. w...
I Have HPE MSA 2060 LFF ISCSI , But my servers network and my switch are all FC. Is there a way to convert this storage to FC ? If I get a separate FC controller and replace it on the storage, will it be supported? Please guide me
I have several questions related to an MSA2060 Where can I find the MIBs for the MSA2060, ned to integrate with Solarwinds Orion What is the recommended Maximum Volume size for an MSA based LUN conecting to a Windows 2022 system? Are there O/S specif...
Hi. I'm fortunate enough to have come into an HPE Proliant DL380 Gen9 and an accompanying HPE D3600 disk enclosure. The enclosure if fully populated with twelve 6 TB drives. It was a unit that was a duplicate system from work that we had no need for,...
I Have HPE MSA 2060 LFF ISCSI , But my servers network and my switch are all FC. Is there a way to convert this storage to FC ? If I get a separate FC controller and replace it on the storage, will it be supported? Please guide me
Can some one please guide me how to replace failed harddisks in P2000 g3 without data loss. I have two P2000 G3 units with 7 harddisks of 300GB in each and are in RAID 5 . in enclosure1 one hard disk is failed and enclosure2 two harddisks are failed.
@ePicNet The instruction previous is incorrect. Replacing drives in an MSA 2050 (Gen5) disk group with larger drives will not change disk-group usable capacity. The Gen5 MSA uses only traditional RAID sets (RAID 1, 10, 5 and 6) which determine a mini...
New Messages
No New Messages
Hot Topic
Replied-to Topic
Read-Only Topic
