LACP between HPE 6300M 24SFP+ and HPE 2530

[Frederic92]

Hi there,

i'am trying to setup our new Network with 2 HPE 6300M in VSF. I connected other HPE 6100 via LACP to the 6300M VSF Stack successfully.

as i am trying to connect our old HPE 2530 (Port 23,24) to our HPE 6300M (Port 1/0/10, 2/0/10) with two J7177D (1G SFP RJ45), LAG Interfaces get up and the 2530 shows in the LACP Status Success. My Problem: I cant Ping or send Traffic over the VLANs.

In the Moment there are only VLAN 1 and 19. 

I suspect the error in the 2530's config.

Running Configuration
; J9773A Configuration Editor; Created on release #YA.16.04.0008
; Ver #10:19.02.13.98.82.34.61.18.28.f3.84.9c.63.ff.37.27:00
hostname "XXXXXXX"
trunk 23-24 trk1 lacp
ip default-gateway xxx.xxx.xxx.xxx
snmp-server community "public" unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-22,25-28
tagged Trk1
ip address xxx.xxx.xxx.xxx 255.255.0.0
exit
vlan 19
name "DMZ"
tagged Trk1
no ip address
exit
spanning-tree
spanning-tree Trk1 priority 4
allow-unsupported-transceiver
no tftp server
no dhcp config-file-update
no dhcp image-file-update
password manager
password operator

As well here is the config of the LAG Ports on the 6300M

interface 1/1/10
description HP-2530-PoE
no shutdown
lag 10

interface 2/1/10
description HP-2530-PoE
no shutdown
lag 10

interface lag 10
    no shutdown
    no routing
    vlan trunk native 1
    vlan trunk allowed all
    lacp mode active
    exit

[shuff]

might be due to the fact that VSF stacking is not supported on 1G ports as per the 6300 specifications? 

[support_s]

Hello,

Thank you for Posting! HPE Networking forum has moved to Aruba Airheads Community and for HPE networking and Aruba product queries, request you to visit and post your query here.

You can refer to this link for more details.

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.