5700 to ASR 1001 multiple native vlans?

[jerryroy1]

I have a Cisco ASR 1001-x router with a 10g interface that I want to connect to a separate switch (HP5700) and this separate switch will be connected to a native vlan1 on a HP switching fabric (5700's 8 switches) for databases (inside for ASA), now I want to create a sub interface on that same 10g interface to another set of switches that are also on a separate switch fabric (4 switches app/web servers "dmz" on ASA). Currently inside network and DMZ only talk to each only thru ASA. Since both sets of switches (inside and dmz stacks) are vlan1, how would I do this? The other side of ASR goes to AWS Direct connect environment and we need to move data between Data Center (inside and dmz systems) to AWS environment.

Since this independent 5700 switch will be plugged into both the "inside" network stack of switches, and the "dmz" network stack of switches, can this work at all?

interface Ten-GigabitEthernet1/0/16
description DMZ-UAT - 2 - AWS-DC (DMZ app/web)
port link-type hybrid
port hybrid vlan 35 tagged <--- (UAT) environment
port hybrid vlan 1 untagged <--- native dmz environment
speed 10000
duplex full

interface Ten-GigabitEthernet1/0/18
description inside - 2 - AWS-DC (databases)
port link-type hybrid 
port hybrid vlan 1 untagged
speed 10000
duplex full

[Sunitha_Mod]

Hello @jerryroy1,

Thank you for writing to us. 

HPE Networking forum has moved to Aruba Airheads Community and for HPE networking and Aruba product queries, request you to visit and post your query here: Aruba Airheads Community 

You can refer to the below link as well for more details:

HPE Networking forum migration to Aruba Airheads c... - Hewlett Packard Enterprise Community